The structure is installed on a prepared concrete foundation.
Option #1: Concrete strip foundation — the minimum height determined by the depth of freezing of the soil in this region. The minimum width is 500mm.
Option #2: For natural soils that are not prone to heaving. Concrete bollards with embedded parts, connected to each other by a grillage. Installation of the structure is carried out on a prepared site.
The first stage of installation of the structure is the assembly of arches into a single whole, from which the frame is assembled.
Начинается монтаж с установки центральной арки. Для ее временной фиксации в рабочем положении необходимо использовать растяжки. После установки второй арки, ее предварительно соединяют с первой с помощью перемычек. Перемычки оснащены механизмом натяжения ткани в виде телескопически выдвигающегося кронштейна.При предварительном соединении арок между собой используются перемычки с полностью задвинутым регулировочным кронштейном (минимальной длинны). На этом же этапе производят монтаж рам дверей, окон и ворот, если они предусмотрены в сооружении.
Installation begins with the installation of the central arch. For its temporary fixation in the working position, it is necessary to use stretch marks. After installing the second arch, it is pre-connected to the first with the help of jumpers. The jumpers are equipped with a fabric tension mechanism in the form of a telescopically retractable bracket.When pre-connecting the arches to each other, jumpers are used with the adjustment bracket fully closed (minimum length). At the same stage, the frames of doors, windows and gates are installed, if they are provided for in the structure.
After installing the frame of the future structure, they begin to install the membranes. Each membrane is equipped on the sides with an edge edge, which is inserted into the grooves of the arch profile. Installation of the membrane begins on one side-the edge edges are tucked into the grooves of the arch profile and stretched along the entire arch. At the bend ( in the ridge of the arch), the membrane is passed through the rollers that each arch is equipped with. After installing the membrane in place, it is fixed in a stretched position, pressing the corner to the foundation on both sides of the structure.
After installing the outer membrane, IZOVOL insulation is installed, which is attached to the structural elements of the frame using plastic clamps. The side covered with foil should face the inside of the building.
The next stage of installation is the tension of the membrane. Pre-tension of the membrane fabric in the direction along the arches is provided by stretching the membranes and attaching them to the sides of the structure. For tension in the direction along the building, telescopic brackets of jumpers are used. After stretching one span, the arch is fixed to the foundation in its working position. Similarly, the membranes of the flat ends of the structure are stretched-starting from the central segment in both directions.
The subsequent stages of installation relate to equipping the structure with the necessary equipment, such as:
- Installation of the power grid
- Installation of lighting equipment
- Installation of the ventilation system
- Installation of heating/air conditioning system
- Installation of other necessary equipment
For the implementation of installation supervision, the customer is provided with project documentation, which includes: design drawings, in CAD format, load calculations, anchoring. For the assembly of the structure by additional agreement, the company provides the services of an experienced team of specialists-engineers, technical consultants, builders, as well as equipment and special tools. all necessary elements of fastening of a design are included in the package of delivery of a design.